FUTURE STYLE
 euro 500,00 circa Following technology development achieved through a series of USB Audio products, the UA-101 represents Edirol’s latest compact audio Roland solution for PC, providing 10-in / 10-out, 24-bit/96kHz full duplex audio with MIDI I/O in a compact half rack unit. Powerful, low-latency drivers with WDM and ASIO 2.0 support complete the package. The Edirol UA-101 allows simultaneous recording of 10 channels of audio at 24-bit, 96kHz, or up to 6 channels of audio at 24-bit/192kHz. Two high quality mic pre-amps allow you to record directly into the UA-101 through the XLR/TRS combo jacks with a Hi-Z input especially for guitar. To ensure that your input signals stay within acceptable levels there is an analogue limiter letting you get the maximum from the inputs yet still record without clipping. A further 6 TRS jack sockets provide balanced inputs that are switchable between +4 or -10 dBu, allowing matched input from any line level source. Also there are optical S/PDIF in and out ports for your digitally-equipped sources. The UA-101 is a single half-rack Hi-SPEED USB audio interface designed to turn your USB2.0 ready computer into a Digital Audio Workstation. No other computer connection is required to get a full 10 inputs and 10 outputs at 24-bit 96kHz to the computer. The UA-101 is built on new Hi-SPEED USB technology to offer low latency and extraordinary stability paired with high audio quality . Dedicated Monitor Output The UA-101 offers dedicated monitor outputs, kept separate from its channel outputs 1-8. All Balanced I/O The UA-101 offers all balanced inputs and outputs with input level selection switches on inputs 3-8, offering either +4dBu or -10dBu levels. Included Signal Router/Mixer Application The UA-101 comes with a software application that allows you to route your inputs to various outputs and adjust your input monitor mix. This application allows the UA-101 to be reconfigured in a variety of ways without requiring any cable swapping or changes in your DAW application. Built-In Limiter The UA-101 allows you more freedom in setting your recording levels with the built-in limiter to prevent clipping in your recordings with a wide dynamic range. Audio Fidelity with 40-bit Internal Processing All audio is processed internally at 40-bit resolution to ensure accurate recording. MIDI I/O The UA-101 offers both MIDI Input and MIDI Output to connect external MIDI devices into your digital system. Optical S/PDIF Input and Output Channels 9 and 10 are dedicated S/PDIF digital channels, offering convenient connection to DAT, Minidisc, or other digital sources and destinations at up to 96kHz. Low-Latency Driver Support The UA-101 offers low latency through both WDM and ASIO2.0 support for good performances in your home studio. Hi-SPEED USB (USB2.0) and Full-Speed (USB1.1) compatible The UA-101 is the first Multi-Channel Hi-SPEED USB audio interface to offer basic compatibility with USB1.1. When connected through USB1.1, the UA-101 will function as a stereo audio interface at 44.1 or 48kHz with any Win98 or later PC or Mac OS 9 or Mac OS X computer. When connected to Windows XP computer running USB2.0, the UA-101 offers the full set of I/O options to your computer. Key Features Dedicated Monitor Output All Balanced I/O Included Signal Router/Mixer Application Built-In Limiter 40-bit Internal Processing MIDI I/O Optical S/PDIF (Ch. 9-10) Low-Latency Drivers: WDM, ASIO2.0 Hi-SPEED USB (USB2.0) and Full-Speed (USB1.1) compatible System Requirements 10-channel performance using USB 2.0 (Hi-SPEED USB) Windows OS: Microsoft Windows XP Home SP1/XP Professional SP1 * OS update is required (Microsoft Knowledgebase ID 822603). Microsoft Windows XP Home SP2/XP Professional SP2 Computer: Windows XP compatible computer equipped with a USB 2.0 (Hi-SPEED USB) port *Intel chipset recommended. *When using an added USB 2.0 interface card, such as a PCI card, "NEC PCI to USB Enhanced Host Controller" is recommended. CPU/Clock: Pentium III, Pentium 4, Pentium® M Processor 1.2 GHz or higher. * Pentium 1.3 GHz or higher is recommended for laptops. * UA-101 may not perform to its full specs when used with Celeron Processors. Memory(RAM): 256 MB or more (Two channel full-duplex recording / playback performance is capable. Input 3-8 and output 3-8 ports don't work. 44.1 and 48 kHz sampling rates are applicable.) 2-channel performance at 44.1kHz or 48kHz, using USB1.1 Windows *OS: Microsoft(r) Windows(r) XP Home/XP Professional/Me/2000/98SE *Computer: Windows XP/Me/2000/Me compatible computer equipped with a USB 1.1 (Full-SPEED) port *CPU/Clock: Pentium(r), Celeron(r) or Intel compatible processors / 600 MHz or higher *Memory(RAM): 128 MB or more Macintosh *OS: Mac OS X 10.2 or later, Mac OS 9.x *Computer: Apple Macintosh series with on-board USB port *CPU/Clock: PowerPC G3/400 MHz or higher *Memory(RAM): 128 MB or more *256 MB or more is recommended in Mac OS X. Software OMS 2.3.5 or later. FreeMIDI 1.35 or later. (Mac OS 9.x) |
|
advanced technologic sound magazine 2005 June issue 138
|
